OK, Allu like to see the boring stuff nah?.. lol I can stop posting until I have exciting stuff
![[thumbsup]](./images/smilies/thumbsup.gif "Thumbs Up")
.. Allu will let me know... mean while.. here is some more stuff
.. no not an engine.
Below, as you can see... Body work has officially started. In previous post I did say that the engine bay was gonna be sprayed to start back mounting parts.. but .. like the project goal... Those plans have taken a twist. For now the plan is we gonna spray the entire car minus the front fenders, bonnet, targa, front bumper, back bumper, and lil bits and ends. Basically the stripped body of the car seen in the other pics and later do the other parts separately. P.s. if you look properly you will see on the sides the resurrection of the stock spoiler holes.. was under some fiber glass. Poor thing. They put a big spoiler on you.. yes they did.. doh worry charddy will take care of you baby.
GEDC1011.JPG
Here we have the corner area of the windscreen frame.. was rusting a bit. What you seeing in the pic is some bronzing. The rust was grind down and it was bronzed with a touch and bronze rod. This would prevent the rust from forming on the steal in the future. Actually both ends on the frame had to be bronzed like this. One side was worse than the other. The tract screws has to be replaced with stainless steal ones.. once i find them.. them tings didn't even look like screws.
GEDC1009.JPG
If you look properly you will see a weld and if you look even more closely you will see a crack. Not sure if the bolt blocking it... but I saw it while i was under the car. This thing is the thing that hold the rear diff. Its cracking in two area's actually. lol.. scary huh?... anyways.. I already sourced one in perfect condition to replace the whole enter thing.
GEDC1014.JPG
and I reach my limit ... will post a pic in the next post.
You do not have the required permissions to view the files attached to this post.
![[rap]](./images/smilies/rap.gif "rap"){kind=small}
... ok maybe it doesn't look brand new but it is, Its just been in a warehouse for alot of years and probably dragged around just a lil bit. It's an after market OEM replica, made out of plastic/rubber-ish material. 
.. Hey dell according the the counting ring gear and pinion as well as counting the number of spins to make a complete turn on the pinion... I got roughly a 4.55 ratio.. hmm
![[ugly]](./images/smilies/bag.gif "ugly"){kind=small}
