scientist wrote: Need $$$$$$$$$$$$$$$$
All that money you made for Carnival!! You even have people lol at me re my pic on Carnival.DA
Project 4G63T PG1 Updated
-
Evo-Man
- King for a few months
- Posts: 1905
- Joined: Mon Aug 13, 2007 12:21 pm
Re: Project 4G63T
All that money you made for Carnival!! You even have people lol at me re my pic on Carnival.DA
EVO 4 LIFE
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
Re: Project 4G63T
well since i haven't had time lately to give the car any attention and things kinda slow with sourcing some of the parts
i'll just let u guys kinda see some of my inspiration for this project
i'll just let u guys kinda see some of my inspiration for this project
/////////Ralliart
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
Re: Project 4G63T
Well as i start removing parts for full servicing i start uncovering quite a bit of puzzling occurances. to make a long story short, i now gotta get a transfer case and drive shaft to add to the rear axles.
But anyways moving onto the project
Over the weekend i began prepping my N/a head for transplant onto the block. Since this was a used head it had quite a bit of carbon build up but during the week when i get back my dremmel tool and a few grits of sand paper i will polish the ports and the valves.
After a few stints of degreaser the head started looking like something again
Valves getting ready to be ground
Berky Begins grinding valves
And me taking a turn at it
Me spraying the degreaser on
Almost cleaned head *Project Reponse Head in the background
VR4 engine bay
But anyways moving onto the project
Over the weekend i began prepping my N/a head for transplant onto the block. Since this was a used head it had quite a bit of carbon build up but during the week when i get back my dremmel tool and a few grits of sand paper i will polish the ports and the valves.
After a few stints of degreaser the head started looking like something again
Valves getting ready to be ground
Berky Begins grinding valves
And me taking a turn at it
Me spraying the degreaser on
Almost cleaned head *Project Reponse Head in the background
VR4 engine bay
/////////Ralliart
-
SF5
- You can't stop posting can you
- Posts: 1309
- Joined: Fri Oct 13, 2006 2:15 pm
Re: Project 4G63T
What wrong with the transfer case?
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
![[whistle]](./images/smilies/whistling.gif "whistling"){kind=small}
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
Re: Project 4G63T
DGLOBE69 wrote: QUESTION, "WHAT ARE YOU PLANNING ON DOING IN THIS PROJECT?
sorry i missed your question
Stage 1 on this project is Restoration...just Getting the car to a point where i am happy and it can be daily driven.
From there i will decide what direction i will take on mods
/////////Ralliart
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
-
SF5
- You can't stop posting can you
- Posts: 1309
- Joined: Fri Oct 13, 2006 2:15 pm
Re: Project 4G63T
looking good so far.
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
Re: Project 4G63T
Have:
Drive Shaft
3 bolt Rear axles - Soon for Sale
Transfercase
Ordered:
4 Bolt LSD Rear end
4 bolt axles and cups
5 lug spindles and hubs
solid shifter bushings
2G GSX MAF+Pigtail Harness
5 Lug conversion (Gonna have to put the rims further up the list)
On Wait List
Evo 3 Turbo
Evo 3 Exhaust Manifold
Evo 3 O2 housing
Evo 3 Intake Manifold
Denso 660cc injectors (Stock 530s may be sold soon)
Drive Shaft
3 bolt Rear axles - Soon for Sale
Transfercase
Ordered:
4 Bolt LSD Rear end
4 bolt axles and cups
5 lug spindles and hubs
solid shifter bushings
2G GSX MAF+Pigtail Harness
5 Lug conversion (Gonna have to put the rims further up the list)
On Wait List
Evo 3 Turbo
Evo 3 Exhaust Manifold
Evo 3 O2 housing
Evo 3 Intake Manifold
Denso 660cc injectors (Stock 530s may be sold soon)
/////////Ralliart