Project 4G63T PG1 Updated

[Sikes]

Good...whats the ETa for the road test?

All depends on how soon things get here.
Shouldn't take me more than a day to fab up the brake lines.
Not more than a day to get the engine back in and wired up.

A bit more to deal with a few other little quirks and then to fire her up.

I've started putting some of the other requirements in as i prep for the brake lines.

Now when all that is complete time to assemble crew, which might take a few more day. Very anxious to see this one hit the road, myself.

[motion sickness]

I would paint the shell, if it hasn't been done yet, so u can paint the engine bay to match the whole car. Colour choice? I call charcoal grey from the Evo9 MR

[scientist]

I would paint the shell, if it hasn't been done yet, so u can paint the engine bay to match the whole car. Colour choice? I call charcoal grey from the Evo9 MR

I painted the engine bay black. Easier to Fake the wire tuck etc.

Color Choice:

Either Gun grey like the evo or SLR 722 Crystal Amantium Grey

i'm not spraying the car yet. that will be left for when i'm finished with a few more things. I'm getting it up and running to break in the engine and do the base tune before i put it down again to finish the break upgrades

[motion sickness]

Cool. Another nice colour would be that bluish colour from the C6 carbon vette with a black roof or the grey/silver from the new Scion Tc.

[motion sickness]

Scion colour is called Cement. Lol, yes it looks like the grey of cement. Cool colour, especially if you're going with blk, gunmetal or a bright coloured (bright green, purple, blue, yellow) wheel set.

[scientist]

Scion colour is called Cement. Lol, yes it looks like the grey of cement. Cool colour, especially if you're going with blk, gunmetal or a bright coloured (bright green, purple, blue, yellow) wheel set.

Yeah i may be going Neon green on the wheels...all depends on which wheels i pickup

[scientist]

So I've start the Preliminary bends tonight
Will post more pics and better details tommorow when i complete it




Hopefully by summer i will be able to rid my engine bay of almost All unnecessary wiring and also hide everything to make it clean and tidy

[scientist]

Almost done with the brakes, Been a real busy and hectic past few weeks so i have basically stalled working on the car. The garage has also been busy so it was on the back burner.

The brake lines will be done soon enough and hopefully will get the beast fired up on the new motor soon

[TheGoodGuy]

You know I was thinking.. If you did sharper bends on the break lines it would neater. I don't believe those lines kink easily.

[scientist]

You know I was thinking.. If you did sharper bends on the break lines it would neater. I don't believe those lines kink easily.

the bender didn't want to do them tighter. Once i've done the final fit and finish i will tighten them up