380 BHP EVO VII

Turbo Projects, Brake Swaps, Engine Swaps, Tranny Swaps etc, post them here. ONLY FULLY DOCUMENTED PROJECTS PLEASE
User avatar
Evo-Man
King for a few months
Posts: 1905
Joined: Mon Aug 13, 2007 12:21 pm

Re: pl006

Post by Evo-Man »

smokeyonline wrote: 2k miles is not a lot. Get the 280 cams and I hope a reflash/retune is part of your $1k budget because you will need one.


Retune $125.00 part of the bueget.

Damian when it starts to smell I will place the order.
EVO 4 LIFE

User avatar
Starboy_X
Instigator
Posts: 730
Joined: Sat Jun 12, 2004 1:30 am

Re: pl006

Post by Starboy_X »

Robby since you haven't been drag racing I don't see hard launches being an issue. Or am I wrong? Do you drag race yourself?

User avatar
skidmarx
You can't stop posting can you
You can't stop posting can you
Posts: 1009
Joined: Thu Aug 31, 2006 12:18 am

Re: pl006

Post by skidmarx »

kobi wrote: doh make fun of d man nah fellers... somebody tongue cyah slip then.
I think d man wanted to say 210 kmh on the parkway which is fast too..131 mph... what most cars cant\'s do.
But really 210 mph..that sounds like when man testing those jet cars in the desert...lol although some street cars have that top speed too but still..."on the parkway!!!! [laugh] [laugh] good for u bro.... i doh wanna see u on the autobahn in Germany nah. [clapping]

boss the man was just flying too low. [dwl] [dwl]
Image
Word of advice - "Dont let them see you coming"
whispering now.... [sneaky]
"True car enthusiasts are open-minded to everyone's creation"

User avatar
Evo-Man
King for a few months
Posts: 1905
Joined: Mon Aug 13, 2007 12:21 pm

Re: pl006

Post by Evo-Man »

Starboy_X wrote: Robby since you haven't been drag racing I don't see hard launches being an issue. Or am I wrong? Do you drag race yourself?

Fortunately I have not done that, as there is not competition for such racing. I have only done a few 1/4 mile run after major upgrades or tunes to get the times. For horse power calculations I do pulls in all gears from 2000 rpm to 8000 rpm.
EVO 4 LIFE

User avatar
Silent_NightR34
moderator
moderator
Posts: 175
Joined: Wed Aug 30, 2006 8:53 pm

Re: pl006

Post by Silent_NightR34 »

heh i just realised that your budget is 1k.. do you really care about idle alot because there is alot more power to be had.. there have been many good results with the jun cams set that comes with springs and all.. i think ams got like a 50 or so hp improvement by switching to them from hks 280`s

User avatar
Evo-Man
King for a few months
Posts: 1905
Joined: Mon Aug 13, 2007 12:21 pm

Re: pl006

Post by Evo-Man »

Silent_NightR34 wrote: heh i just realised that your budget is 1k.. do you really care about idle alot because there is alot more power to be had.. there have been many good results with the jun cams set that comes with springs and all.. i think ams got like a 50 or so hp improvement by switching to them from hks 280`s

Bad idling is an issue, with my BOV venting into the atmosphere I already have idling issues, but I can allways put it back inside. I will read up on the Jun Cams. Thanks for all the great data. [2clap]
EVO 4 LIFE

User avatar
Evo-Man
King for a few months
Posts: 1905
Joined: Mon Aug 13, 2007 12:21 pm

Re: pl006

Post by Evo-Man »

Assistance needed, please advise where i can purchase this missing part for my spolier. I was doing 230mph and it blew off.
You do not have the required permissions to view the files attached to this post.
EVO 4 LIFE

User avatar
Preppy
You can't stop posting can you
You can't stop posting can you
Posts: 1101
Joined: Thu Sep 14, 2006 12:21 pm

Re: pl006

Post by Preppy »

ffs dude,wat tornado u was in??
Image


Image Image

Back ah Neck of MoPo
All Motor Addict
All Motor Addict
Posts: 127
Joined: Thu May 11, 2017 11:38 am

Re: pl006

Post by Back ah Neck of MoPo »

Hurricane Type Winds Man>>>

Cly-dee
Power Junkie
Power Junkie
Posts: 337
Joined: Thu May 11, 2017 11:38 am

Re: pl006

Post by Cly-dee »

is that the same for the american versions? If so u should ask smokey to check it out for you.

Post Reply