Project 4G63T PG1 Updated
-
Preppy
- You can't stop posting can you
- Posts: 1101
- Joined: Thu Sep 14, 2006 12:21 pm
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
Re: Project 4G63T PG1 Updated
a gain of 700 uber Horsepowers ![[kick]](./images/smilies/kicking.gif "kicking")
1. Reduction in engine rotational mass
2. No more failed balance shaft beltss as the secondary shaft is no longer driven.
1. Reduction in engine rotational mass
2. No more failed balance shaft beltss as the secondary shaft is no longer driven.
/////////Ralliart
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
Re: Project 4G63T PG1 Updated
Small update
Pistons are in, Main and Rod caps torqued down to factory spec after they were checked for stretch. Race balance shafts installed with new oil pump. Oil Pump preluded and primed.
Plans for today: Rear main seal, change out one of the front seals that came with the oil pump. Install strainer and bottom pan, Clean up and re-install oil filter housing and begin working on the head.
Pistons are in, Main and Rod caps torqued down to factory spec after they were checked for stretch. Race balance shafts installed with new oil pump. Oil Pump preluded and primed.
Plans for today: Rear main seal, change out one of the front seals that came with the oil pump. Install strainer and bottom pan, Clean up and re-install oil filter housing and begin working on the head.
/////////Ralliart
-
TheGoodGuy
- You can't stop posting can you
- Posts: 1543
- Joined: Fri Mar 14, 2008 11:24 am
Re: Project 4G63T PG1 Updated
Good stuff.. time for delilia and 4g63t to be done... so Delilia can smoke a VR-4.. welll two of them.. an Evo 7 in the future plans too.
"Its not the size of the engine that matters... its how much shit you can bolt to it....."
-
Lil Stig
- moderator
- Posts: 363
- Joined: Wed Aug 15, 2007 10:24 am
Re: Project 4G63T PG1 Updated
TheGoodGuy wrote:Good stuff.. time for delilia and 4g63t to be done... so Delilia can smoke a VR-4.. welll two of them.. an Evo 7 in the future plans too.
good luck with your endeavours lol.
-
TheGoodGuy
- You can't stop posting can you
- Posts: 1543
- Joined: Fri Mar 14, 2008 11:24 am
Re: Project 4G63T PG1 Updated
lol.. mouth alone I have..
"Its not the size of the engine that matters... its how much shit you can bolt to it....."
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
-
Lil Stig
- moderator
- Posts: 363
- Joined: Wed Aug 15, 2007 10:24 am
Re: Project 4G63T PG1 Updated
lepra take it easy on the exhaust lol. see de man makin love to the thing ![[dwl]](./images/smilies/pofl.gif "dieing with laughter")
-
TheGoodGuy
- You can't stop posting can you
- Posts: 1543
- Joined: Fri Mar 14, 2008 11:24 am
Re: Project 4G63T PG1 Updated
Time for the bottom pan and Head... drop that baby into its bay.. and rest the head in place. 
..
P.S. if my memory serves me right.. that jack or stand or what ever its call has like the tiniest head... HOW THE HELL lepra sitting on that so comfortably?![[:.]](./images/smilies/shocked.gif "shocked")
.. P.S. if my memory serves me right.. that jack or stand or what ever its call has like the tiniest head... HOW THE HELL lepra sitting on that so comfortably?
"Its not the size of the engine that matters... its how much shit you can bolt to it....."
-
scientist
- moderator
- Posts: 4599
- Joined: Mon Aug 13, 2007 1:31 am
Re: Project 4G63T PG1 Updated
he has a piece of plywood underneath it.....that jack stand has no head that's why.TheGoodGuy wrote:P.S. if my memory serves me right.. that jack or stand or what ever its call has like the tiniest head... HOW THE HELL lepra sitting on that so comfortably?
/////////Ralliart