Page 1 of 38

Project 4G63T PG1 Updated

Posted: Sun Jan 21, 2007 5:43 pm
by scientist
Well....almost everyone knows i acquired a 88 Galant VR4....but its also not so great of condition [thumbsdown]

Well day one of the project was basically towing it over to our super secret bat cave [2clap] ok i know it isn't funny.


Project Parts List For first round of parts

Ignition
Custom Coil on Plug

Engine
King Bearings Race bearings
ARP Hardware
Eagle Rods
Wiseco Pistons
Mitsubishi MLS head gasket
Street Tuned Motorsports (STM) Oil Cooler

Fuel:
Injector Dynamics 1000CC
Fuel Lab FPR

Turbo:
FP DSM 3065 Turbo
Custom Oil feedline with heat barrier sheild (Prevent manifold from burning into line and rupturing it)
FP Inline Oil filter
FP Race Manifold
Auto Clinic Custom braided -6an water feed and return lines
Custom 4" intake

Exhaust
3" O2 housing back exhaust
FP 2.5" V band O2 Elbow
Tial 44MM wastegate

Suspension
KYB AGX (Temporary)
Tuners Nation Subframe Bushings

Drive train:
4 Bolt LSD rear end with axles and cups
5 Lug conversion
Solid Shifter cable bushings
Competition Clutch Twin Disk
Tuners Nation Master to slave cylinder Charcoal braided clutch line
Tuners Nation charcoal braided brake lines
4WS Elimination[/u]

Exterior
93 Galant LS Crystal headlights
Custom Front Lip

Electronics
Omni 4 Bar map sensor
GM IAT sensor
90 EPROM Ecu
MOATES Ostrich 2.0 Emulator and MOATES Chip burner
Relocated Battery to Trunk

Re: Project 4G63T

Posted: Sun Jan 21, 2007 5:54 pm
by club4g63
good luck i have been in this car and belive me it has fire just a lil heavy but u can make a thig happen they see the oldschool they spoke off in the secret place aswell ,nice.

Re: Project 4G63T

Posted: Sun Jan 21, 2007 6:11 pm
by punch
It has begun, young gunz project mitsu #2

Re: Project 4G63T

Posted: Sun Jan 21, 2007 6:12 pm
by kenwin
eyy congrats on the purchase,,i expect lots of development on this project...Also like the old school scene [thumbsup]

Re: Project 4G63T

Posted: Sun Jan 21, 2007 6:28 pm
by hilliuse
i remember this car
lets see what yall do with it

Re: Project 4G63T

Posted: Sun Jan 21, 2007 6:31 pm
by Cly-dee
nice project sci [2thumbsup] u have alot of work to do but the body lookin in good shape man just under the hood. I didnt kno it was that car, i used to see it around.

Re: Project 4G63T

Posted: Sun Jan 21, 2007 7:01 pm
by djphattraxx
Congrats my boy ! [cheers] Very good start!

Re: Project 4G63T

Posted: Sun Jan 21, 2007 7:53 pm
by SF5
How's it sound? You got a MAF?

Re: Project 4G63T

Posted: Sun Jan 21, 2007 8:54 pm
by EVO2ENVY
Good luck to you bro. It's a bit on the heavy side but it has great potential [thumbsup] .

Re: Project 4G63T

Posted: Sun Jan 21, 2007 10:36 pm
by ceelos
DcaTSiAWD wrote: How's it sound? You got a MAF?



No MAF as yet. is also off timing and the plugs were in the wrong firing order. but we got it started. it also has a few other things here and there that have to get done.