Page 1 of 4

Turbo D16Z6.

Posted: Tue Sep 16, 2008 10:20 pm
by fingazz
Just picked up my lil 94 civic 4dr project hoopty.
Upside: Already turbocharged, intercooler, Greddy BOV, turbo timer, gage cluster (boost,oil and fuel).
Full exhaust, 2.5 inch drop, 17" chrome rims and falken rubber. Altezza lights, Bowling Ball Swirl Paint.

DownSide: Automatic [thumbsdown] [drive] Blown Head Gasket (first sub project)Messy Engine Bay (bad wiring)
Incomplete changes(wrong hardware, halfway complete work)

Short Term: Replace Head gasket, water pump, timing belt, Valve cover gasket, tune-up.

Long Term: Tranny Swap.

Re: Turbo D16Z6.

Posted: Tue Sep 16, 2008 10:56 pm
by fingazz
Image
Image
Image

Re: Turbo D16Z6.

Posted: Wed Sep 17, 2008 1:12 pm
by killab
where the pics of the actual car

Re: Turbo D16Z6.

Posted: Wed Sep 17, 2008 7:27 pm
by fingazz
These are some pix of the actual car.

Re: Turbo D16Z6.

Posted: Wed Sep 17, 2008 8:33 pm
by motion sickness
you might be able to get something for the wing and the rims to get a manual trans

Re: Turbo D16Z6.

Posted: Wed Sep 17, 2008 8:43 pm
by fingazz
These are some pix of what i was working on today.

Re: Turbo D16Z6.

Posted: Wed Sep 17, 2008 9:05 pm
by Preppy
Nice. Good luck on your Turbo Civic.

Could any1 tell me what the R emblem on the back means?

Re: Turbo D16Z6.

Posted: Wed Sep 17, 2008 10:20 pm
by TheGoodGuy
Racing?

Re: Turbo D16Z6.

Posted: Sat Sep 20, 2008 10:52 am
by fingazz
I got done taking off the head yesterday.
The gasket was not blown but the head was worped.
Taking it to a machine shop to get it resurfaced.

Re: Turbo D16Z6.

Posted: Sat Sep 20, 2008 11:27 am
by TheGoodGuy
If the head is warped can it really be resurfaced?