Page 8 of 53
Re: pl006
Posted: Sun Dec 03, 2006 1:22 pm
by Preppy
EL OH EL
Re: pl006
Posted: Sun Dec 10, 2006 1:20 am
by Evo-Man
Updates
/b]
Stock Horse Power = 247 whp
Current Power = 274 whp - This has been corrected thanks to Datalog lab - for Dyno data http://www.dataloglab.com
Boost = 21.5 PSI
Steel Braided Brake Lines - new lines have been purchased since one of the old ones popped.
The graph below is from the Datalog, it reads all the data that was logged and provides a nice graph. It also provides a graph of your power, aka a road dyno.
Re: pl006
Posted: Sun Dec 10, 2006 7:58 pm
by EVO2ENVY
Why don't you do a 3rd gear pull for comparison? Most of the tuners here do 3rd gear pulls when tuning on the dyno.
Re: pl006
Posted: Sun Dec 10, 2006 8:20 pm
by SF5
that's a lot of boost man...
Re: pl006
Posted: Sun Dec 10, 2006 8:35 pm
by scientist
and u still aint send me the graph with AFR...
Re: pl006
Posted: Sun Dec 10, 2006 10:05 pm
by Evo-Man
smokeyonline wrote:
Why don't you do a 3rd gear pull for comparison? Most of the tuners here do 3rd gear pulls when tuning on the dyno.
I have one, I will check it out in a while. I also just did a few runs ten minutes ago. I got a nice pull by the Port, guess how fast i went?
Re: pl006
Posted: Sun Dec 10, 2006 10:12 pm
by Starboy_X
210mph??? Can you say Parkway by the port...
![[dwl]](./images/smilies/pofl.gif "dieing with laughter")
Re: pl006
Posted: Sun Dec 10, 2006 10:37 pm
by scientist
you mean skerrit parkway?
Re: pl006
Posted: Sun Dec 10, 2006 11:24 pm
by Evo-Man
Starboy_X wrote:
210mph??? Can you say Parkway by the port...
Garcon that was a good one. Just checked the data from "Guinness Parkway" by the port, and the results are as follows:
1st gear = 235 whp
2nd gear = 268 whp
3rd gear = 276 whp
4th gear = 277 whp
Re: pl006
Posted: Mon Dec 11, 2006 12:54 pm
by Starboy_X
So how fast did you "went"?