380 BHP EVO VII
-
Evo-Man
- King for a few months
- Posts: 1905
- Joined: Mon Aug 13, 2007 12:21 pm
Re: pl006
Updates
/b]
Stock Horse Power = 247 whp
Current Power = 274 whp - This has been corrected thanks to Datalog lab - for Dyno data http://www.dataloglab.com
Boost = 21.5 PSI
Steel Braided Brake Lines - new lines have been purchased since one of the old ones popped.
The graph below is from the Datalog, it reads all the data that was logged and provides a nice graph. It also provides a graph of your power, aka a road dyno.
/b]Stock Horse Power = 247 whp
Current Power = 274 whp - This has been corrected thanks to Datalog lab - for Dyno data http://www.dataloglab.com
Boost = 21.5 PSI
Steel Braided Brake Lines - new lines have been purchased since one of the old ones popped.
The graph below is from the Datalog, it reads all the data that was logged and provides a nice graph. It also provides a graph of your power, aka a road dyno.
You do not have the required permissions to view the files attached to this post.
Last edited by Anonymous on Sun Dec 10, 2006 10:19 pm, edited 1 time in total.
EVO 4 LIFE
-
Evo-Man
- King for a few months
- Posts: 1905
- Joined: Mon Aug 13, 2007 12:21 pm
Re: pl006
smokeyonline wrote: Why don't you do a 3rd gear pull for comparison? Most of the tuners here do 3rd gear pulls when tuning on the dyno.
I have one, I will check it out in a while. I also just did a few runs ten minutes ago. I got a nice pull by the Port, guess how fast i went?
EVO 4 LIFE
-
Evo-Man
- King for a few months
- Posts: 1905
- Joined: Mon Aug 13, 2007 12:21 pm
Re: pl006
Starboy_X wrote: 210mph??? Can you say Parkway by the port...![[dwl]](./images/smilies/pofl.gif "dieing with laughter")
Garcon that was a good one. Just checked the data from "Guinness Parkway" by the port, and the results are as follows:
1st gear = 235 whp
2nd gear = 268 whp
3rd gear = 276 whp
4th gear = 277 whp
EVO 4 LIFE