Onlydominican.com

Yeah i know those plugs will be up to the task...motorcycles run high cylinder pressures and rev extremely high, both requiring a strong spark.

My question more related from keeping debris out of there, but from lookin at those pics it looks well sealed.

You gonna try batch or sequential ignition?

That is top secret for now... no comment

lol.top secret.yes my boy do ur magic.anywayz ill be there to spy the progress of my competition later on today.

hahahhaa, you see now I have to give my secretary to hide everything when you come around. Once everything is up and running I will cough up some more information.

The car will have the followin driven off megasquirt I V3.0 the MSII daughter board will be installed once the gurus get the MS II/Extra code running

Anti-Lag
Boost control
Knock Sense
Launch control
Fan control will be implemented when I decide to remove the stock fans.
Meth Injection will be handled separately via pressure sensor, however MS can handle that as well so who knows as I become more of a megapeepee guru I will try more tings

Bloody done building the MS, tested it on the stim, CLT, IAT, O2 sensor, MAP sensor, RPM Signal all work. So installation on the car is the next step. Overall building this ting is a 7 on 10 for difficulty would take the average person a couple hrs (10hrs str8) 182.00 well spent!

reminds me of my am/fm radio i built in college. took hours of assembling and tuning to get it right.

Finalized everything

Underside showing my jumpers to run my Coil on plug setup..similar to the jumpers u do with Emanage but this is DIY B!#ch!

Tiny thing on the side is the stim... to get a squirt you got to stimulate it ahhahahahaha nail clipper does the trick to cut resistor legs shorter, nothing does it more precise!

My idea of a screen shot if u can see everything runs, O2 (for wideband,IAT,CLT etc

Stim is in there getting her to squirt


Empty space near my thumb is is called the proto area for building/adding other functions like Anti Lag, Boost control that kinda ting

In the case half

C-O-M-P-L-E-T-E

The lil piece of hose poking out is for the built in MAP sensor, (no maf here ppl) It doesn't have to be like this but I chose to cut a piece and put it in there for testing purposes



I am going to build a custom wiring harness later on.

Fantastic bro, I love the program displays.

Now that you have it down pack build one and send it for me.

i am very interested in this board..