Project 4G63T PG1 Updated

[evo 6 rs]

ok i am back on this site and was following up on this project if u are going to chip your ecu y u are going to buy a s-afc and wat type of wideband sensor are u going to use

Too much freaking work.

have to get hub rings, wire up sensors, Redo brake lines and proportioning valve, Tap source from the Ecu, source pump and control unit. Splice into my harness to wire it up. NOT WORTH it.

[scientist]

Didn't buy the SAFC, was phat-i's own. Was going to use it to compensate for the Eclipse maf and the injectors.

I am considering buying the Zietronix wideband or just going back to the AEM (Sold mine to someone in more need of it than i was).

[evo 6 rs]

ok well i bought a innovate wideband sensor and i find it works well and i have it in for 8 months now and never had to change the sensor. i also went with a flash ecu in my evo 6 rs and after the third tuning u could feel the big difference especially when he tune it to run on 20 psi on a normal factory evo 6 rs the only thinig i had on is a cheap power flow.

Didn't buy the SAFC, was phat-i's own. Was going to use it to compensate for the Eclipse maf and the injectors.

I am considering buying the Zietronix wideband or just going back to the AEM (Sold mine to someone in more need of it than i was).

[scientist]

ok well i bought a innovate wideband sensor and i find it works well and i have it in for 8 months now and never had to change the sensor. i also went with a flash ecu in my evo 6 rs and after the third tuning u could feel the big difference especially when he tune it to run on 20 psi on a normal factory evo 6 rs the only thinig i had on is a cheap power flow.

Didn't buy the SAFC, was phat-i's own. Was going to use it to compensate for the Eclipse maf and the injectors.

I am considering buying the Zietronix wideband or just going back to the AEM (Sold mine to someone in more need of it than i was).

What i'm doing to the factory ecu is similar to the method you are using with ecu flash. Except I can make those changes in real time and the rom i'm using is speed Density only...so no more maf for me. Haven't had much luck with innovate widebands. have had two take a dump on me. But theres been word of a bad batch of them were circulated but oh well. I've moved on. Have had great luck with AEM. Others have had great luck with Zeitronix. I'm going zeitronix to reduce clutter inside the car... consolidate boost, egt and AFR into one gauge.

Have you tried any of the launch control maps?

[evo 6 rs]

not as yet the tuner told me he didnt wanted to try that cause the car is still stock and didnt wanted to burst a block so we just tune it on 20psi on pump gas and leave it so. and i am a person when it comes to 4wd redline and move thats how i have been running my car from since

ok well i bought a innovate wideband sensor and i find it works well and i have it in for 8 months now and never had to change the sensor. i also went with a flash ecu in my evo 6 rs and after the third tuning u could feel the big difference especially when he tune it to run on 20 psi on a normal factory evo 6 rs the only thinig i had on is a cheap power flow.

Didn't buy the SAFC, was phat-i's own. Was going to use it to compensate for the Eclipse maf and the injectors.

I am considering buying the Zietronix wideband or just going back to the AEM (Sold mine to someone in more need of it than i was).

What i'm doing to the factory ecu is similar to the method you are using with ecu flash. Except I can make those changes in real time and the rom i'm using is speed Density only...so no more maf for me. Haven't had much luck with innovate widebands. have had two take a dump on me. But theres been word of a bad batch of them were circulated but oh well. I've moved on. Have had great luck with AEM. Others have had great luck with Zeitronix. I'm going zeitronix to reduce clutter inside the car... consolidate boost, egt and AFR into one gauge.

Have you tried any of the launch control maps?

[scientist]

Launching at Redline is worse than using launch control

[dr payaso]

so wen that project touching the road? so long i hearing about that galant.sound like it going and give some of them evo's their fair share pound. to much niggas running for evo. time for evo to get dicipline

[scientist]

Soon enough...still have a backorder of a few needed parts

[Evo-Man]

LOL, I want a LB

so wen that project touching the road? so long i hearing about that galant.sound like it going and give some of them evo's their fair share pound. to much niggas running for evo. time for evo to get dicipline

[scientist]

Engine bay was painted yesterday....I spray it in black...cause everyone knows a black engine bay makes you faster!

I couldn't get a decent pic last night..I'll take one before lunch ok Charddy?