Page 4 of 7
Re: Project ST205
Posted: Wed Aug 01, 2007 7:30 pm
by motion sickness
Good luck to you and the project. One more badboy piece of the road.
My personal thought is the 272 cams are too aggressive. You'll endup with a loop. Also, what about the valve springs to handle those cams?
Re: Project ST205
Posted: Thu Aug 02, 2007 12:28 pm
by dxndmhal
Not sure if i can get them changed now but i will research your opinion. Thanks man.
Re: Project ST205
Posted: Thu Aug 02, 2007 12:41 pm
by scientist
Some do 264 intake and 272 exhaust to help keep a stock like idle.
Depending on the lift of the 272s it should idle just fine, with a slight lump when cold
Re: Project ST205
Posted: Thu Aug 02, 2007 1:26 pm
by DGLOBE69
KRYMAHAR NICE PROGGIE, WE ARE BOTH UNDERTAKING SIMILAR PROGGIE I ON THE OTHER HAND WILL BE MAKING AN ST205. DO HOPE WE GET THE OPPORTUNITY TO SHARE SOME INFO. U ARE AHEAD KEEP US UPDATED.
Re: Project ST205
Posted: Thu Aug 02, 2007 2:01 pm
by dxndmhal
That's what its all about DGLOBE69 one helping the other, anytime man, just ask,767-275-0049
krymaha@hotmail.com; i go
help out however i can..
Re: Project ST205
Posted: Thu Aug 02, 2007 3:44 pm
by DGLOBE69
http://www.gtfour.ca/race.html
HEY HERE ARE A FEW TIPS.
TITAN CELICA BUT HEY WE KNOW IT NOT STREET LEGAL BUT WAS IMPRESSIVE
http://www.youtube.com/watch?v=l4kvG_EDRVk
CELICA 250KM IN 9 SEC.
http://www.youtube.com/watch?v=3cOn7wrZGx8
Re: Project ST205
Posted: Thu Aug 02, 2007 8:47 pm
by SF5
Why follow the dust when you could be the one making it.
Re: Project ST205
Posted: Mon Aug 13, 2007 1:56 pm
by DGLOBE69
HEY I WANT TO GET A MANIFOLD ABSOLUTE PRESSURE SENSOR, MAN DIFFICULT GETTING JUST THE MAP SENSOR UP HERE FOR THE ST205. OR ANY ONE KNOW WHERE I CAN GET ONE?
Re: Project ST205
Posted: Mon Aug 13, 2007 4:05 pm
by scientist
If you know the part number try barbados...the toyota dealer there
Re: Project ST205
Posted: Mon Aug 13, 2007 8:51 pm
by SF5
isn't the partnumber written on that ting.