My SF5

[Preppy]

Dat u like eh preppy

I still waiting to get some black tint and mole skin......... and you need to re-tint eh Mr. DB (am referring to your chassis code, not ur initials)

[SF5]

JDM 1997 Subaru Impreza WRX STI EJ20 2.0L engine swap with 5 speed manual transmission in good running condition with 75,239 miles.


Motor swap Includes:
5 Speed Manual Transmission with Shifter
Top mounted intercooler
Turbo
Igniter
Airflow Meter
Starter
Wireharness
Ecu
Alternator
Ac compressor
And all parts shown in pictures
[flash=][/flash]

[TheGoodGuy]

Have any plans of upgrading to the tuffer 6 speed transmission?

[SF5]

I am not gonna be beating on my car, only need that if you don't understand the limitations of the car.
Sti V3/V4 EJ20K ECU Pinout, Hope that this site doesn't get deleted. need to store this here my laptop is unpredictable lately.

Input
113 ECU power
111 Ignition SW
37 Airflow sensor signal
36 Airflow sensor ground
38 O2 Sensor
33 crank angle sensor +
34 crank angle sensor ground
35 cam angle sensor
40 water temp sensor
39 knock sensor
48 throttle sensor power
46 throttle sensor signal
45 absolute pressure sensor
22 car speed sensor
43 exhaust noise sensor 1
31 Air conditioner SW
23 Starter SW
32 Neutral SW
115 sensor-type ground
105 injector ground
110 power type ground
116 ??
106 ignition ground
24 intake temperature sensor
28 intercooler spray auto SW
7:44
output

104 injector #1
101 injector #2
102 injector #3
103 injector #4
1 ignition signal 1,2
2 ignition signal 3,4
107 IDC valve open
108 IDC valve close
26 canister purge solenoid
8 ? pressure solenoid
5 atmosphere switch solenoid
17 radiator fan relay 1
25 radiator fan relay 2
4 fuel pump relay
11 aircon relay
3 check engine lamp
12 exhaust sound warning lamp
27 engine rotation signal
20 select monitor send
21 select monitor receive
41 test mode connector
42 reed (lead?) memory connector
30 AT ?
18 AT air amount
d



http://www.bakemono-imports.com/suby005.jpg
http://www.bakemono-imports.com/suby006.jpg
http://www.bakemono-imports.com/suby007.jpg
http://www.bakemono-imports.com/suby008.jpg

Parts needed for swap...

WRX/LEGACY or STi Turbo front crossmember/subframe
4.44 Rear differential R180 LSD
Water/Methanol Injection kit
WRX/Sti Radiator (Mishimoto,CXRacing or koyo) (need radiator since the turbo gets coolant feed from the radiator)
k&N air filter
Greddy Timing Belt
Subaru Timing belt pulley, and tensioner
Subaru Genuine water Pump
Rotella T 10w 40 motor oil
Fresh Sparks
Fuel Filter
Walbro Fuel Pump
Boost guage
Oil pressure Gauge
WIdeband Gauge
Custom Downpipe

[TheGoodGuy]

Boy.. Cannot wait to start a Subaru project. .. Dell ur inspiring a lil tomuch i am getting impatient.

[SF5]

cars is stress, right now i have a noise coming out the back of my wagon, i think its the back door, but i will probably eleminate that but we getting a snow storm, plus the supra getting msd blaster coils and Dis4 installed, thats taking all my time. Also gettin funds together since i wanna do the whole front suspension over while i have the entire thing off anyway. New Sway bars, control arms, front cross member...... would love to upgrade the brakes but I need rims for that.. That will come sometime before summer. But ill definitely upgrade the rest of the front suspension since i'm removing switching subframes. Slowly but surely its coming along just need time!!!!!!!!!!!!!!!!

[SF5]

R&L trucking stopped by today and left a sweet little pallet for me, im shocked at the overal size, looks like a garbage bag on a pallet. Got home too late from work today so couldn't unwrap it. I see the entire harness from the sti is there down to the fuse box, headlight harness, battery terminals, I may need to have a few hoses made, specifically the power steering and a.c lines nothing too big, and to fabricate a catless downpipe. I could have it all swapped in one day, and starting but i;m in no rush... i'll wait to get the subframe, emanage ultimate and fuel pump.... patience.....

[TheGoodGuy]

Niceness!

[SF5]

i was gonna wait till i had everything in my list to do the swap, I'm no gonna wait, I'm just gonna go ahead and get the shit that are necessary for the swap.

Crossmember-- got one for 94.00 pickin it up sunday.
walbro fuel pump--- to be delivered
Exhaust pipe, flanges and gaskets... to be delivered
differential....pick up at junkyard 125.00
boost gauge.... to be bought.

once its installed and runnin gonna take it easy till its tuned for 93octane

[SF5]

Quick update, just sorting out the wiring, had to do it a bit complex, my engine in the car is going into the red forester since it has some head issues. Also has to stay obd2 for emissions purposes switch over to the oem motor. Thats so far away but always plan ahead. Here are a few pics of the motor as it lays




I lucked out on the diff,got one from a 2005 subaru forester xt that met its end with on 6000miles on the dash, nice and clean. $187.00
2003 WRX turbo wagon front subframe..rust free $94.00 will be painted with 3 coats of hightemp paint and clear coated as well (blk or red)
3" flanges, 5 feet of 3" pipe, 45/90 and u bends .....$80.00 thats for the exhaust, they will be temp.coated and wrapped keeping the factory heat shield on the turbine housing... may put a blanket on it as well.
Sti 2 row aluminum radiator with aluminum fan shroud and twin fans..$280.00 do it right the first time
Walbro Fuel pump 255Lph ..$84.50...

couple tings i missing
need to measure the turbo inlet and maf diameter didnt get the hose that cpnnects them...
need to get some gauges and cups to hold them boost, oil pressure and pyro
wanna change radiator hoses,belts, plugs,air filter,water pump, plug wires but thaat'll be done after it starts, just waiting for saturday to start installing.