Re: Project 4G63T PG1 Updated
Posted: Tue Oct 14, 2008 12:44 pm
what are the advantages of doing this?
![[kick]](./images/smilies/kicking.gif "kicking"){kind=small}
1. Reduction in engine rotational mass
2. No more failed balance shaft beltss as the secondary shaft is no longer driven.
Onlydominican.com
Dominica's Online Automotive Magazine
http://www.onlydominican.com:80/forum/
Project 4G63T PG1 Updated
Page 17 of 38
Re: Project 4G63T PG1 Updated
Posted: Tue Oct 14, 2008 2:19 pm
a gain of 700 uber Horsepowers
1. Reduction in engine rotational mass
2. No more failed balance shaft beltss as the secondary shaft is no longer driven.
1. Reduction in engine rotational mass
2. No more failed balance shaft beltss as the secondary shaft is no longer driven.
Re: Project 4G63T PG1 Updated
Posted: Fri Oct 24, 2008 7:49 am
Small update
Pistons are in, Main and Rod caps torqued down to factory spec after they were checked for stretch. Race balance shafts installed with new oil pump. Oil Pump preluded and primed.
Plans for today: Rear main seal, change out one of the front seals that came with the oil pump. Install strainer and bottom pan, Clean up and re-install oil filter housing and begin working on the head.
Pistons are in, Main and Rod caps torqued down to factory spec after they were checked for stretch. Race balance shafts installed with new oil pump. Oil Pump preluded and primed.
Plans for today: Rear main seal, change out one of the front seals that came with the oil pump. Install strainer and bottom pan, Clean up and re-install oil filter housing and begin working on the head.
Re: Project 4G63T PG1 Updated
Posted: Fri Oct 24, 2008 8:24 pm
Good stuff.. time for delilia and 4g63t to be done... so Delilia can smoke a VR-4.. welll two of them.. an Evo 7 in the future plans too.
Re: Project 4G63T PG1 Updated
Posted: Fri Oct 24, 2008 11:38 pm
TheGoodGuy wrote:Good stuff.. time for delilia and 4g63t to be done... so Delilia can smoke a VR-4.. welll two of them.. an Evo 7 in the future plans too.
good luck with your endeavours lol.
Re: Project 4G63T PG1 Updated
Posted: Sat Oct 25, 2008 8:37 am
lol.. mouth alone I have..
Re: Project 4G63T PG1 Updated
Posted: Sun Oct 26, 2008 10:30 am
Re: Project 4G63T PG1 Updated
Posted: Sun Oct 26, 2008 12:06 pm
lepra take it easy on the exhaust lol. see de man makin love to the thing ![[dwl]](./images/smilies/pofl.gif "dieing with laughter")
Re: Project 4G63T PG1 Updated
Posted: Sun Oct 26, 2008 9:05 pm
Time for the bottom pan and Head... drop that baby into its bay.. and rest the head in place. 
..
P.S. if my memory serves me right.. that jack or stand or what ever its call has like the tiniest head... HOW THE HELL lepra sitting on that so comfortably?![[:.]](./images/smilies/shocked.gif "shocked")
.. P.S. if my memory serves me right.. that jack or stand or what ever its call has like the tiniest head... HOW THE HELL lepra sitting on that so comfortably?
Re: Project 4G63T PG1 Updated
Posted: Mon Oct 27, 2008 7:54 am
he has a piece of plywood underneath it.....that jack stand has no head that's why.TheGoodGuy wrote:P.S. if my memory serves me right.. that jack or stand or what ever its call has like the tiniest head... HOW THE HELL lepra sitting on that so comfortably?