altezza rs200

Turbo Projects, Brake Swaps, Engine Swaps, Tranny Swaps etc, post them here. ONLY FULLY DOCUMENTED PROJECTS PLEASE
User avatar
scientist
moderator
moderator
Posts: 4599
Joined: Mon Aug 13, 2007 1:31 am

Re: altezza rs200

Post by scientist »

Typical Tezza setup...what i've mostly seen in the caribbean.

Toda cams (us600) + Toda valve springs (us300) retains vvt and gives 15 - 20 hp at the wheels

Intake

full exhaust system with decat cost ? (headers from toda cost about 1000us)

Camcon controller 300 - 350 us (5hp increase at peak but 15lbs more torque in the midrange)


RS200
Engine Transmission Power (PS) Torque (Nm)
1998 cc 4-Cyl 6 Spd Manual 210 @ 7,600 rpm 216 @ 6,400 rpm
1998 cc 4-Cyl 5 Spd Auto 200 @ 7,000 rpm 216 @ 4,800 rpm


Manual vs Auto

As you may have observed from the above table the RS200 manual generates a little more horsepower. Nope, it's not due to massive driveline losses - the two engines have slightly different components in the head arrangement.

The manual 3S-GE dual head has higher lift cams than that found in the tiptronic model. This is part of the reason for the 7500 redline in the manual.

The manual should have more top end, but who drives their car at 7000 rpm all the time...

Traction Control and LSD is standard on the 6MT, but only optional on the auto.


BEAMS
B.E.A.M.S. stands for Breakthrough Engine with Advanced Management System it is developed by Yamaha.
/////////Ralliart

User avatar
scientist
moderator
moderator
Posts: 4599
Joined: Mon Aug 13, 2007 1:31 am

Re: altezza rs200

Post by scientist »

Cusco Strut Bar + Master Cylinder Stopper
Image

Image
Shiny! I didnt know it was going to be polished!

Image
Installed

Image
master cylinder brace
/////////Ralliart

User avatar
SF5
You can't stop posting can you
You can't stop posting can you
Posts: 1309
Joined: Fri Oct 13, 2006 2:15 pm

Re: altezza rs200

Post by SF5 »

Purpose of the BMC stopper? I do not know everything eh

User avatar
scientist
moderator
moderator
Posts: 4599
Joined: Mon Aug 13, 2007 1:31 am

Re: altezza rs200

Post by scientist »

Help increase Pedal Feel Under heavy braking by reducing bulkhead flexing.
/////////Ralliart

User avatar
scientist
moderator
moderator
Posts: 4599
Joined: Mon Aug 13, 2007 1:31 am

Re: altezza rs200

Post by scientist »

PealPK should be able to comment on them...lemme ask him since he had one on his Levin together with a jey other cusco and tien goodies
/////////Ralliart

User avatar
SF5
You can't stop posting can you
You can't stop posting can you
Posts: 1309
Joined: Fri Oct 13, 2006 2:15 pm

Re: altezza rs200

Post by SF5 »

Oh nice, very nice I could see this coming in handy.

User avatar
scientist
moderator
moderator
Posts: 4599
Joined: Mon Aug 13, 2007 1:31 am

Re: altezza rs200

Post by scientist »

Ps...

the GruppeM intake is one of the highest regarded for the Altezza

their RAM air system with K&N filter is kinda $$$$ at about $600 usd

Image


this one...which is just the filter with heat shield is about $400
Image

both filters feature Carbon Fibre tracts
/////////Ralliart

User avatar
scientist
moderator
moderator
Posts: 4599
Joined: Mon Aug 13, 2007 1:31 am

Re: altezza rs200

Post by scientist »

Image

We developed the special carbon duct case for ALTEZZA SXE10. RAM AIR SYSTEM used maximum space of ALTEZA SXE10 engine room. RAM AIR SYSTEM can stop heat temperature inside engine room and can leads cool fresh air from front section. RAM AIR SYSTEM can make more torque and maximum power from middle range rpm to high range rpm than stock intake and you can feel better accelerate and aggressive intake sound. RAM AIR SYSTEM kit is all bolt on kit, so you do not need any modify on your car. All staff included into the kit.
https://www.gruppem.co.jp/onlinestore_e ... cts_id=107




the Drop in filter is about $100
/////////Ralliart

Cly-dee
Power Junkie
Power Junkie
Posts: 337
Joined: Thu May 11, 2017 11:38 am

Re: altezza rs200

Post by Cly-dee »

ye boi that intake is the perfect thing for the tezza but it soo damm expensive.

pearlpk534
Posts: 9
Joined: Thu Feb 22, 2007 12:08 pm

Re: altezza rs200

Post by pearlpk534 »

Hi there


I am now in mini SUV territory.....and enjoying the beauty of full time 4WD but u need to have steel braided lines in order for you to get the complete feel of the master cylinder stopper.

I am in the process of getting a CUSCO master cylinder stopper and bottom strut brace for my SXA11W rav4.

Slowly but surely project PK534 is just show like the one before PB534 just different.

Will post some pics soon....
LATA

Post Reply