Page 2 of 2
Re: rwd starlet with 4g63t
Posted: Sun Feb 12, 2012 2:56 pm
by manjidrift
motion sickness wrote:Is the bell housing l200 also?
Might be, I think 4G64/63 has the same bellhousing pattern no?
Would be cool to drop a 4G63T in an L300.
Re: rwd starlet with 4g63t
Posted: Sun Feb 12, 2012 4:25 pm
by scientist
manjidrift wrote:motion sickness wrote:Is the bell housing l200 also?
Might be, I think 4G64/63 has the same bellhousing pattern no?
Would be cool to drop a 4G63T in an L300.
Probably, since he would only have these adjustments to make
Re: rwd starlet with 4g63t
Posted: Thu Feb 16, 2012 8:00 am
by dwight
narrowblock its a evo6 engine with a 2.3 stroker kit
scientist wrote:dwight wrote:is a l200 trans from the later models had to do some fab for it to work
motion sickness wrote:What trans is that?
wideblock vs narrowblock?
Re: rwd starlet with 4g63t
Posted: Thu Feb 16, 2012 8:02 am
by dwight
yep the whole gear box is out of a l200 just had to bore over the holes so it could bolt up on the block
motion sickness wrote:Is the bell housing l200 also?
Re: rwd starlet with 4g63t
Posted: Fri Feb 17, 2012 12:12 pm
by manjidrift
Tomei or Jun stroker kit? Damn that's nice
Re: rwd starlet with 4g63t
Posted: Fri Feb 17, 2012 2:57 pm
by scientist
I would think more on the lines 4G63 block with 4G64 Crank. Tomei and JUN are way overpriced IMHO.
Re: rwd starlet with 4g63t
Posted: Tue Feb 21, 2012 10:20 am
by dwight
4g63 block with a eagle 2.4 crank and stroker pistons
scientist wrote:I would think more on the lines 4G63 block with 4G64 Crank. Tomei and JUN are way overpriced IMHO.