Onlydominican.com

don't forget, lots of pics

Ok so, what should I get? Larger injectors or a FPR? I'm leaning towards an FPR because it's cheaper and I can use it to make more power anyways...

I'm still trying to find an engine hoist.. I'll get some pictures of everything once I get my memory card for my camera back....

I got the ARP headstuds in.. I'm pissed it didn't come with the ARP Moly lube... Hopefully my bearings and main studs should be in soon..

Got the stuff ordered from AMS in..
Here is a picture of most of the stuff that's going in..



New o2 sensor for the wideband.
ARP main and head studs
Plastigage
Clevite Main and Rod bearings
NGK spark plugs
Knock sensor
3" silicone hose..

Here is what my car looks like at the moment..





Just bought/made a new setup for working at night..



Damn driveshaft bolts....

Project looks like its coming along nicely.

Silent_NightR34 wrote:Got the stuff ordered from AMS in..


Just bought/made a new setup for working at night..



Damn driveshaft bolts....

It's like an under-car neon kit...for teh garage...

So here is a picture update:





So I took off the cam journal holders and saw this.. I wonder if it can be fixed.. (the random dirt is from me, the entire head will be getting cleaned before reassembly lol..) If this wasn't here the car would probably be running by next week..







Those are all the parts I got in.. (bought some larger injectors too)



With these injectors I'm pretty much at the limit of the walbro fuel pump.. I'm thinking about buying another to make a dual pump setup..

Anyways now I have to remove the head to see if it can be repaired. If so, I'll also get it surfaced.. I opened up the bottom and it looks like the rotating assembly was balanced.. The journal bearings down there look like they are in good condition but I think I'll just replace them anyways since I already have new ones..

thats very common on ka24de and sr20 and some others like the 2jz. Some ppl would say take some fine grit sand paper to it I'd only do so if it felt rough. ONLY if it was rough... Use some assembly lube and put the thing back together.

Yeah.. they are pretty rough... rough enough to catch my fingernail.. I'm thinking about just buying a new head ($100).. The deepest scratches are almost .5 mm deep..

Great photo's and update/information. Keep it coming.. signed "the silent observer" lol ..

yeh just make sure before u pay it isn't scratched too